【HBR】
Adjustable piping band
【Key Feature of the Products】
☆Characteristic features of the shape enables to match the piping shape on-site, allowing for a sturdy installation without disrupting the aesthetics.
☆Used to support vertical and horizontal piping in combination with L-shaped angles, C-shaped channels, etc.
☆ Includes two flat washers and two hex nuts for mounting onto steel materials.
☆ By using separately sold insulation materials or in combination with our DHV, you can implement measures to prevent condensation and protect the piping from damage.
Caution
-This product cannot be used to support heavy metal pipes such as cast iron pipes or to support upside-down hanging.
-In the case of vertical piping, take additional measures to prevent displacement of the pipe.
-Do not bend the band at a sharp angle or bend it repeatedly, as the band may be damaged.
-The tightening torque of the nut should be 4.9J (50 kg-cm) or less. When supporting the insulated piping, be careful not to over-tighten.
-The maximum pipe support pitch should be 1.5m.
-The insulation base (HBIB) sold separately is for 40mm wide C-shape channel and L-shape angle. It can not be fixed to different size of C-shape channels or L-shape angles.
-Cannot be used outdoors.
-Insulation (HBI) and Insulation Base (HBIB) cannot be used for polybutene pipes.